{"id":958,"date":"2026-10-23T11:19:18","date_gmt":"2026-10-23T03:19:18","guid":{"rendered":"https:\/\/carbonizationplant.com\/?post_type=product&p=958"},"modified":"2026-10-23T11:19:20","modified_gmt":"2026-10-23T03:19:20","slug":"metal-chips-briquetting-machine","status":"publish","type":"product","link":"https:\/\/carbonizationplant.com\/fr\/product\/metal-chips-briquetting-machine\/","title":{"rendered":"Metal Chips Briquetting Machine"},"content":{"rendered":"
\n \n
\n \n
\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n <\/div>\n \n
\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n
\n \n\n
<\/div>\n <\/div>\n <\/div>\n<\/div>\n \n\n
\n 4.9\/5 - (56 votes) <\/div>\n <\/div>\n\n

UN metal chips briquetting machine<\/mark><\/strong> is a hydraulic cold-press system designed to compress loose metal swarf, chips, and powder into dense, uniform cakes. It can process 150\u2013200 kg of material per hour, converting iron chips, steel chips, stainless steel chips, aluminum chips, and metal powder into high-density briquettes ready for direct furnace remelting.<\/p>\n\n\n

\n
\"Hydraulic
Hydraulic Metal Chip Compactor<\/figcaption><\/figure>\n<\/div>\n\n\n

Compared with traditional scrap handling, a metal chips briquetting press works at room temperature. It requires no heating and no additives. The finished cakes reach a density of 2\u20136 tons per cubic meter. This greatly reduces oxidation loss during melting and improves furnace feeding efficiency.<\/p>\n\n\n\n

\n
\"Iron
Iron Chip Briquettes<\/figcaption><\/figure>\n\n\n\n
\"Metal
Metal Briquettes<\/figcaption><\/figure>\n<\/figure>\n\n\n\n

Shuliy offers three types of metal briquetting equipment to match different workshop layouts and output targets. Each metal swarf compactor uses PLC automatic control to keep pressure stable and cake size consistent.<\/p>\n\n\n\n

Technical Specifications of the Metal Chips Briquetting Machine<\/h2>\n\n\n\n
Article<\/th>Vertical Type<\/th>Box Type<\/th>Twin-Screw Type<\/th><\/tr>
Nominal force<\/td>1,200 kN<\/td>80 tons<\/td>160 tons<\/td><\/tr>
System pressure<\/td>13\u201325 MPa<\/td>\u2014<\/td>31.5 MPa<\/td><\/tr>
Briquette diameter<\/td>180 mm<\/td>70 \u00d7 10\u201350 mm<\/td>\u03a6100 mm<\/td><\/tr>
Single briquette weight<\/td>0.8\u20131.5 kg<\/td>3\u20136 kg (application range)<\/td>\u2014<\/td><\/tr>
Compression ratio<\/td>\u2014<\/td>5:1<\/td>3.0:1<\/td><\/tr>
Output<\/td>150\u2013200 kg\/h<\/td>About 90 s per cycle<\/td>2\u20134 briquettes\/min<\/td><\/tr>
Main motor<\/td>7.5 kW<\/td>3.75 + 0.75 kVA<\/td>7.5 kW<\/td><\/tr>
Auxiliary motor<\/td>\u2014<\/td>\u2014<\/td>Screw motor 2.2 + 1.5 kW<\/td><\/tr>
Feeding opening<\/td>\u2014<\/td>450 \u00d7 400 mm<\/td>1,000 \u00d7 600 mm<\/td><\/tr>
Control system<\/td>PLC control<\/td>3-phase 380 V<\/td>PLC automatic control<\/td><\/tr>
Machine weight<\/td>\u2014<\/td>650 kg<\/td>\u2014<\/td><\/tr>
Taille de la machine<\/td>1,200 \u00d7 700 \u00d7 1,500 mm<\/td>\u2014<\/td>1,600 \u00d7 1,150 \u00d7 1,400 mm<\/td><\/tr>
Cooling<\/td>\u2014<\/td>\u2014<\/td>Air-cooled cooler, 80 L oil tank<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\n
\"Vertical
Vertical Metal Swarf Briquetter<\/figcaption><\/figure>\n\n\n\n
\"Metal
Metal Swarf Briquetter<\/figcaption><\/figure>\n<\/figure>\n\n\n\n

Vertical Metal Chips Briquetting Machine for Small and Medium Workshops<\/h2>\n\n\n\n

The vertical metal chips briquetting machine is built for compact workshops with limited floor space. It applies a 1,200 kN nominal force through a 300 mm main hydraulic cylinder. The system pressure ranges from 13 to 25 MPa.<\/p>\n\n\n\n

This model produces 180 mm diameter cakes weighing 0.8\u20131.5 kg each. It runs 2\u20133 cycles per minute and delivers an hourly output of 150\u2013200 kg. A 7.5 kW main motor drives the hydraulic system. PLC control keeps every cycle consistent, so operators can run the machine with minimal training.<\/p>\n\n\n

\n
\"Vertical
Vertical Type Metal Chips Briquetting Machine<\/figcaption><\/figure>\n<\/div>\n\n\n

Box-Type Metal Chips Briquetting Press for Batch Processing Operations<\/h2>\n\n\n\n

The box-type Metal Chips Briquetting Press is a heavy-duty unit for batch compression of aluminum, iron, and copper swarf. It delivers a maximum pressing force of 80 tons. The 450 \u00d7 400 mm feeding opening accepts large volumes of loose chips in one load.<\/p>\n\n\n\n

This Scrap Metal Briquette Machine achieves a 5:1 compression ratio on CNC aluminum chips. Each cycle takes about 90 seconds. The compressed material exits at 70 \u00d7 10\u201350 mm. The compact frame weighs only 650 kg and runs on 3-phase 380 V power, so it fits easily into existing production lines.<\/p>\n\n\n

\n
\"Box-Type
Box-Type Metal Chips Briquetting Machine<\/figcaption><\/figure>\n<\/div>\n\n\n

Twin-Screw Metal Swarf Compactor for Continuous High-Output Production<\/h2>\n\n\n\n

The twin-screw metal swarf compactor is designed for continuous, high-volume metal chip processing. Dual spiral feeders push material evenly into the compression chamber. The system then applies a 160-ton pressing force at 31.5 MPa.<\/p>\n\n\n\n

This metal chip briquetting equipment produces \u03a6100 mm cakes at a rate of 2\u20134 briquettes per minute. A 7.5 kW main motor and 2.2 + 1.5 kW screw motors power the system. The 1,000 \u00d7 600 mm feeding opening handles bulk swarf directly from CNC machines. An air-cooled cooler and 80 L oil tank protect the hydraulic system during long runs. A liquid-level control device collects and separates cutting oil and water from the chips.<\/p>\n\n\n

\n
\"Twin-Screw
Twin-Screw Metal Swarf Compactor<\/figcaption><\/figure>\n<\/div>\n\n\n

How Does a Metal Chips Briquetting Machine Work?<\/h2>\n\n\n\n

All three models use the same hydraulic compression cycle. The process works as follows:<\/p>\n\n\n\n

    \n
  1. Loose metal chips enter the material cylinder from the large hopper above.<\/li>\n\n\n\n
  2. The feeding cylinder extends and resets to position the material.<\/li>\n\n\n\n
  3. A secondary cylinder drives the main ram and punch downward rapidly.<\/li>\n\n\n\n
  4. Once the punch enters the die cavity, the main cylinder applies full pressure and compresses the chips into a dense cake.<\/li>\n\n\n\n
  5. After holding pressure, the auxiliary cylinder pulls the die block back.<\/li>\n\n\n\n
  6. The main ram pushes the finished cake out of the die cavity.<\/li>\n\n\n\n
  7. The ejection cylinder extends and discharges the cake, completing one full cycle.<\/li>\n<\/ol>\n\n\n\n

    The entire cycle runs automatically under PLC control. Operators only need to feed material and collect finished briquettes.<\/p>\n\n\n

    \n
    \"Feed
    Feed Inlet<\/figcaption><\/figure>\n<\/div>\n\n\n

    Key Advantages of Cold Press Metal Chips Briquetting<\/h2>\n\n\n\n